NTRIP setup guides
Step-by-step setup for popular drones and RoverThe receiver that moves around the job, like a survey pole or a drone. It uses the base's corrections to find its exact spot.Full definition, in plain words, based on each maker's own manuals.
Before you start
Get five things from your provider
CasterThe internet server that hands out correction streams. Your rover logs in to it, like tuning into a radio station.Full definition host, PortA number that tells your device which "door" on the caster server to use. For NTRIP it's often 2101.Full definition, username, password and Mount pointOne specific correction stream on a caster, like one channel on a radio. Each one comes from a certain station or network setup.Full definition. Every guide below asks for the same five.
Pick your device
Drones and DJI
- DJI RC Plus / DJI Pilot 2 (any Enterprise drone)Guide
- DJI Matrice 350 RTKGuide
- DJI Mavic 3 Enterprise (M3E)Guide
- DJI Matrice 4EGuide
- DJI D-RTK 3 Multifunctional StationGuide
Survey rovers and apps
- Emlid Reach (RS3, RS4, RX, RS2+)Guide
- Trimble Access (R-series rovers)Guide
- Carlson SurvPC / SurvCEGuide
- Trimble Catalyst (DA1 / DA2) with Trimble Mobile ManagerGuide
- Leica GS18 / GS16 with Leica CaptivateGuide
- CHC i80 / i90 / i93 with LandStar 8Guide
- Topcon HiPer with MAGNET FieldGuide
- Spectra Geospatial SP85 with OriginGuide